Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP400/700/100PL-D combines a mixer, agitator and hydraulic plunger grout pump in one compact plant. A diesel engine drives the hydraulic system. The equipment mixes and pumps compatible cement, bentonite and additive-based slurries, with separate low- and high-pressure pump duties and stepless speed adjustment.

Specifications at a glance.

WGP400/700/100PL-D · Technical specifications
ModelWGP400/700/100PL-D
Mixer capacity400 L
Agitator volume700 L
Low-pressure pump duty100 L/min at 25 bar
High-pressure pump duty40 L/min at 50 bar
Pump typeHydraulic plunger pump
Diesel engine rating (source-listed)25 kW / 36 hp
Engine speed2200 rpm
Water/cement ratio0.5–1
Mixer speed1500 rpm
Agitator speed36 rpm
Dimensions (L × W × H)2900 × 1900 × 1750 mm
Weight1900 kg

The 100 L/min at 25 bar and 40 L/min at 50 bar ratings are separate duties. Engine power is reproduced as the source lists it; confirm the final engine data sheet and material compatibility.

Mixing, control and grout delivery.

01

Single-frame plant

Mixer, agitator and hydraulic plunger pump are integrated on one base frame.

02

Two pump duties

Separate low- and high-pressure duties support different injection requirements.

03

Stepless speed regulation

Pump delivery can be adjusted for the required grouting duty.

04

Hydraulic valves

The source specifies Yuken relief and directional valves.

05

Butterfly-valve transfer

Mixer and agitator valves manage slurry transfer.

06

Oil-temperature protection

A temperature gauge controls the cooler fan, with automatic shutdown if oil temperature is too high.

Match the plant to the project.

  • Civil engineering

    Dam foundations, tunnels, anchors, soil nails and rock-bolt grouting.

  • Structures and construction

    Foundation stabilisation, bridge restoration, soil compaction, pavement undersealing and slab raising.

  • Marine and mining

    Underwater foundations, pier works, contact grouting and shaft waterproofing.

  • Geotechnical and utility works

    Well sealing, casing, waterproofing and slope-line injection.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com