Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP1000/1600/20HP-E combines a cylindrical mixing tank, circulation pump, agitator and hose pump on a base frame. A high-speed vortex draws material from the bottom of the mixer and returns it tangentially to prepare a homogeneous colloidal slurry. Timed pneumatic pipe-clamp valve operation directs the mixture to storage or the point of use. The system is intended for compatible mixtures of water, cementitious powders, bentonite, pozzolans and admixtures.

Specifications at a glance.

WGP1000/1600/20HP-E · Technical specifications
ModelWGP1000/1600/20HP-E
Mixer capacity (technical table)1200 L
Agitator capacity1600 L
Hose pump output20 m³/h
Mixer output18–20 m³/h
Mixer circulation pump1350 L/min
Mixer power15 kW
Mixer speed1450 rpm
Agitator speed40 rpm
Agitator power2.2 kW
Hose pump maximum pressure1.5 MPa
Hose pump power18.5 kW
Electrical supply380 V, 50 Hz
Dimensions (L × W × H)4300 × 2250 × 2200 mm
Weight2600 kg

The source model suffix is retained while its brand prefix is changed to WGP. The technical table lists a 1200 L mixer despite the 1000 in the model. The 1350 L/min figure is mixer circulation, not hose-pump delivery. Maximum output and maximum pressure are separate listed ratings; confirm the required operating point. Generic vertical-piston features on the source page are not applied to this hose-pump model.

Mixing, control and grout delivery.

01

Vortex mixing

A circulation pump draws material from the tank bottom and returns it tangentially.

02

Colloidal slurry preparation

High-speed recirculation supports homogeneous mixtures in a short mixing cycle.

03

Controlled transfer

Timed operation of a pneumatic pipe-clamp valve directs slurry to storage or the application point.

04

Integrated plant

The mixer, agitator and hose-pump equipment are arranged as one grout preparation system.

Match the plant to the project.

  • Mining and tunnelling

    Tunnel lining, contact grouting and shaft waterproofing.

  • Construction and structures

    Pavement undersealing, slab raising and assessed foundation or bridge restoration work.

  • Marine and utilities

    Underwater foundations, pier works, encasements and waterproofing.

  • Geotechnical and civil works

    Well sealing, dam foundations, soil nails, anchors and rock-bolt grouting.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com