Recipe-based batching
PLC control supports adjustable material proportions and automatic configuration of the mix.
AUTOMATIC GROUT PLANTS
WGP1200/1200/2×75/100PI-E
PLC-controlled TBM grout station with a 1200 L mixer, 1200 L agitator and two grout pumps. Each pump has separate low-pressure and high-pressure operating ranges.
The WGP1200/1200/2×75/100PI-E combines high-speed mixing, slurry circulation, agitation and twin grout pumps for tunnel grouting. PLC control supports adjustable water, cement and additive proportions, recipe-based batching and automatic material replenishment. Automatic and manual modes allow the station to be operated according to the project workflow.






| Model | WGP1200/1200/2×75/100PI-E |
|---|---|
| Mixer capacity | 1200 L |
| Agitator capacity | 1200 L |
| Grout pump quantity | 2 sets |
| Water/cement ratio | 0.5–1 |
| Agitator power | 3.0 kW |
| Circulation pump power | 15 kW |
| Circulation pump speed | 1800 rpm |
| Circulation pump flow | 850 L/min |
| Screw feeder power | 7.5 kW |
| Screw feeder delivery | 40 t/h |
| Water tank capacity | 950 L |
| Water pump | 50ZX20-30 (4.0 kW) |
| Water pump flow / head | 20 m³/h / 30 m |
| Additive tank capacity | 150 L |
| Additive pump | 25SFBX-8 (0.25 kW) |
| Additive pump flow / head | 2 m³/h / 8 m |
| Air compressor | V-0.25/8 (2.2 kW) |
| Air compressor exhaust volume | 0.25 m³/min |
| Grout pump model | GGH75/100PI-E |
| Piston diameter | 100 mm |
| Piston stroke | 150 mm |
| Low-pressure operating range | 0–50 bar at 0–75 L/min |
| High-pressure operating range | 0–100 bar at 0–40 L/min |
| Grout pump power (source-listed) | 11 kW |
| Dimensions excluding screw feeder (L × W × H) | 4770 × 2250 × 2370 mm |
| Weight | 3880 kg |
This PI-E model has dimensions of 4770 × 2250 × 2370 mm, circulation power of 15 kW and weight of 3880 kg. Pump ranges are separate duties; confirm whether the source-listed 11 kW refers to each pump before final electrical design. Cabinet and certification requirements must be checked for the supplied configuration.
PLC control supports adjustable material proportions and automatic configuration of the mix.
Vortex mixing disperses water and cement before transfer through the grout system.
The station supports automatic material replenishment during the preparation sequence.
Two operating modes allow the operator to match the process to the site workflow.
Dedicated water and additive tanks support recipe preparation, with an air compressor for pneumatic requirements.
Two pumps provide selectable operating ranges for different pressure and flow requirements.
Grout preparation and injection for tunnel lining and TBM-related grouting.
Grouting where an engineered design calls for waterproofing or sealing.
Slurry injection for assessed foundation or rock-layer treatment.
Grout production for specified void and gap-filling work.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify your grout recipe, required pumping duty, site layout and available power supply when requesting a project configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY