Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated grout preparation and pumping.

The WGP1000/4000/2×165/30PL-E prepares cement or bentonite slurry using high-turbulence mixing, then delivers it through two plunger pumps. Automatic and manual modes support different work sequences. The plant can prepare compound mixes using one or two liquid components and one solid component, with automatic screw feeding and cleaning functions for the mixer, slurry pump and agitator.

Specifications at a glance.

WGP1000/4000/2×165/30PL-E · Technical specifications
ModelWGP1000/4000/2×165/30PL-E
Mixer volume1000 L
Agitator volume4000 L
Maximum mixer output20 m³/h
Mixer circulation flow1200 L/min
Mixer power15 kW
Agitator speed36 rpm
Agitator level sensorUltrasonic
Agitator power2 × 3.0 kW
Air supply flow280 L/min
Air supply power2.2 kW
Water supply flow / head5.6 L/s / 30 m
Water supply power4.0 kW
Grout pump pressure range0–3 MPa
Grout pump flow range2 × (0–10 m³/h)
Grout pump oil tanks2 × 180 L
Grout pump power2 × 15 kW
Plunger diameter120 mm
Plunger stroke200 mm
Cylinder bore80 mm
Cylinder rod diameter45 mm
Maximum particle size5 mm
Dimensions (L × W × H)7200 × 2200 × 3160 mm
Weight8.5 t
Power supply380 V, 50 Hz

All technical data in the source were tested with water. Actual delivery depends on grout properties and pipeline resistance. Pressure and flow ranges do not imply simultaneous maximum performance. The stated enclosure compatibility requires verification against the final internal clearances and installed arrangement.

Mixing, control and grout delivery.

01

Colloidal mixing

High-speed mixing supports cement, bentonite and specified compound grout recipes.

02

Automatic feeding and valves

Cement can be supplied by an automatic screw feeder; the main pipeline valves are pneumatic.

03

Cleaning functions

The mixer, slurry pump and agitator include automatic cleaning functions.

04

Two operating modes

Fully automatic and manual operation support different site workflows.

05

Adjustable twin pumps

Pump output and pressure are steplessly adjustable, with accessible wear parts for maintenance.

06

Work-area lighting

Ceiling lamps illuminate the working areas. The source describes placement in a 40-foot enclosure; confirm the enclosure clearance and delivery arrangement.

Match the plant to the project.

  • Anchoring

    Grout preparation and injection for engineered anchoring work.

  • Contact and backfill grouting

    Slurry production for void filling, contact grouting and backfill operations.

  • Pipe jacking and microtunnelling

    Preparation and pumping of bentonite suspensions.

  • Sleeve-pipe grouting

    Grout delivery for specified sleeve-pipe injection systems.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your grout recipe, required pumping duty, site layout and available power supply when requesting a project configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com