Diesel hydraulic drive
A 25 kW diesel engine powers the hydraulic system.
DIESEL GROUT PLANTS
WGP250/350/100DPI-D
Diesel hydraulic grout plant with a 250 L high-shear mixer, 350 L agitator and two-cylinder piston pump. Adjustable pressure: 0–100 bar; output: 0–100 L/min.
The WGP250/350/100DPI-D combines a high-shear colloidal mixer, agitator and hydraulic two-cylinder piston pump on one base frame. A vortex flow disperses water, cement or bentonite into slurry before transfer to the agitator and delivery by the grout pump. Diesel power drives the hydraulic system. PLC and HMI controls, a pump stroke counter and hydraulic temperature protection support operation.





| Model | WGP250/350/100DPI-D |
|---|---|
| Mixer volume | 250 L |
| Agitator volume | 350 L |
| Pump pressure range | 0–100 bar |
| Pump output range | 0–100 L/min |
| Diesel engine power / speed | 25 kW at 2200 rpm |
| Mixer speed | 1500 rpm |
| Agitator speed | 36 rpm |
| Pump type | Hydraulic two-cylinder piston pump |
| Dimensions (L × W × H) | 2500 × 2200 × 1820 mm |
| Weight | 1550 kg |
This DPI-D model is diesel-driven, as specified by the source technical table and application section. The separately listed maximum pressure and maximum output are not a simultaneous guaranteed duty.
A 25 kW diesel engine powers the hydraulic system.
The colloidal mixer prepares bentonite or cement slurry for transfer into the agitator.
Controls include PLC, HMI and a solid-state relay.
A counter records and displays pump reciprocating cycles.
Pump pressure and output are steplessly adjustable.
A squeeze handle selects slurry transfer; hydraulic oil over-temperature protection supports operation.
Bentonite or cement slurry grouting for construction projects.
Mixing and injection for highway and railway works.
Grout preparation and pumping for assessed water-engineering and mine applications.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY