Mixer and pump on one frame
The integrated layout combines grout preparation and injection without a separate agitator.
ELECTRIC GROUT PLANTS
WGP400/80PL-E
Electric bentonite injection unit with a 400 L high-shear mixer and vertical plunger pump. Pump duties: 80 L/min at 2.4 MPa or 60 L/min at 5 MPa.
The WGP400/80PL-E combines a high-shear mixer and grout pump on one base frame. Vortex mixing disperses water, cement or bentonite into a homogeneous slurry. The pump draws directly from the mixer drum for injection. Electric drive and adjustable pressure and output support grout preparation and delivery in a compact arrangement.






| Model | WGP400/80PL-E |
|---|---|
| Mixer volume | 400 L |
| Pump duty — higher flow | 80 L/min at 2.4 MPa |
| Pump duty — higher pressure | 60 L/min at 5 MPa |
| Mixer speed | 1450 rpm |
| Pump stroke | 220 mm |
| Pump cylinder diameter | 120 mm |
| Pump power | 15 kW |
| Maximum particle size | 5 mm |
| Dimensions (L × W × H) | 2450 × 1200 × 1750 mm |
| Weight | 980 kg |
The two pump flow/pressure pairs are separate duties. This model combines a mixer and pump; no separate agitator capacity is specified in the source.
The integrated layout combines grout preparation and injection without a separate agitator.
Vortex action mixes water with cement or bentonite.
A compact vertical pump draws slurry from the mixer drum.
Pressure and output can be adjusted for the required injection duty.
A squeeze switch controls the changeover between mixing and pumping.
Slurry preparation for microtunnelling, pipe jacking and directional drilling.
Engineered stabilization, micropile, anchor and rock-injection work.
Suitable cavity filling, sealing, gap and contact injection.
Preparation and delivery of compatible drilling slurry.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify your slurry recipe, required pumping duty, site layout, delivery distance and available power supply when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY