High-shear mixing
High-speed vortex mixing prepares cement or bentonite slurry before transfer to the agitator.
DIESEL GROUT PLANTS
WGP400/700/80/100DPI-D
Diesel-powered grout mixing and pumping unit with a 400 L high-shear mixer, 700 L agitator and twin-cylinder piston pump. Pump duties: 80 L/min at 40 bar or 40 L/min at 100 bar.
The WGP400/700/80/100DPI-D combines a high-shear mixer, agitator and twin-cylinder piston grout pump on one frame. Water, cement or bentonite is mixed into a homogeneous slurry, transferred to the agitator and delivered by the grout pump. Separate mixing and agitation vessels support continuous preparation and grouting. The diesel-driven hydraulic system provides adjustable pumping pressure and output.





| Model | WGP400/700/80/100DPI-D |
|---|---|
| Mixer capacity | 400 L |
| Agitator capacity | 700 L |
| Maximum pressure | 100 bar |
| Mixer speed | 1500 rpm |
| Agitator speed | 36 rpm |
| Pump duty — higher flow | 80 L/min at 40 bar |
| Pump duty — higher pressure | 40 L/min at 100 bar |
| Drive | Hydraulic drive; three-cylinder air-cooled diesel engine |
| Maximum particle size | 5 mm |
| Hydraulic cooling | Air and water cooling |
| Dimensions (L × W × H) | 2480 × 1960 × 1995 mm |
| Weight | 1965 kg |
The listed flow and pressure pairs are separate operating duties. This page describes the DPI-D diesel model; the source also shows an upgraded DPI-E electric version, whose optional water tank and auxiliary mixer are not treated as standard equipment here.
High-speed vortex mixing prepares cement or bentonite slurry before transfer to the agitator.
Single-acting twin cylinders provide continuous slurry delivery with reduced pulsation.
Grouting pressure and output can be adjusted to the project requirements.
A three-cylinder air-cooled diesel engine drives the hydraulic system.
Air and water cooling support hydraulic temperature management. An oil thermometer controls the cooling fan, with shutdown on excessive temperature.
A squeeze switch controls the changeover between mixing and agitation.
Micropiling, anchoring injections, permeation and compensation grouting.
Bentonite slurry preparation for microtunnelling, pipe jacking and directional drilling.
Grouting for highway, railway, hydropower and construction projects.
Surface and underground grouting using suitable cement or bentonite slurries.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify the grout recipe, required flow and pressure, site conditions and available power when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY