Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP400/700/320/100TPI-E integrates a colloidal mixer, agitator and reciprocating grout pump on one skid. High-speed vortex mixing disperses water, cement or bentonite, after which the slurry is transferred to the agitator for holding and pumping. The electric motor drives a triplex single-acting piston pump, with selectable operating duties for different flow and pressure requirements. A squeeze switch controls transfer between mixing and agitation.

Specifications at a glance.

WGP400/700/320/100TPI-E · Technical specifications
ModelWGP400/700/320/100TPI-E
Mixer volume400 L
Agitator volume700 L
Pump pressure range2.2–10 MPa
Mixer speed1500 rpm
Agitator speed45 rpm
Agitator power1.5 kW
Pump typeTriplex single-acting reciprocating piston pump
Pump stroke110 mm
Cylinder diameter80 mm
Pump duty 1 — 214 cycles/min320 L/min at 2.2 MPa
Pump duty 2 — 153 cycles/min230 L/min at 3.6 MPa
Pump duty 3 — 109 cycles/min165 L/min at 6.2 MPa
Pump duty 4 — 78 cycles/min118 L/min at 10 MPa
Pump power30 kW
Maximum particle size5 mm
Dimensions (L × W × H)2300 × 2100 × 1880 mm
Weight1500 kg

Each flow, pressure and pump-speed combination is a separate duty from the source table. Do not combine the 320 L/min flow with the 10 MPa pressure. Material suitability and achievable delivery depend on the grout recipe and pipeline system.

Mixing, control and grout delivery.

01

Integrated skid

Mixer, agitator and pump share a transportable base for site installation.

02

Colloidal mixing

High-speed vortex mixing disperses cement or bentonite slurry before holding and pumping.

03

Triplex piston pump

Three single-acting cylinders provide grout delivery with reduced pulsation.

04

Four listed pump duties

The technical table pairs each pump speed with a corresponding flow and pressure.

05

Transfer selection

A squeeze switch selects transfer between the mixing and agitation stages.

Match the plant to the project.

  • Geotechnical grouting

    Soil and rock grouting, permeation injection, anchors, bolts, tiebacks and soil nails.

  • Tunnels and shafts

    Contact grouting, tunnel works and shaft applications.

  • Foundations and dams

    Engineered foundation grouting, waterproofing and dam-related injection.

  • Slurry and infrastructure works

    Suitable slurry-wall, slab-undersealing, drilling and restoration applications.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com