Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated grout preparation and pumping.

The WGP400/700/80DPL-D integrates a high-speed colloidal mixer, agitator and compact vertical twin-plunger grout pump on one base frame. Water, cement or bentonite is mixed into a homogeneous slurry and transferred to the agitator. The diesel-driven hydraulic system powers grout delivery, while the twin-plunger and pressure-holding arrangement supports controlled injection with reduced pressure pulsation.

Specifications at a glance.

WGP400/700/80DPL-D · Technical specifications
ModelWGP400/700/80DPL-D
Mixer capacity400 L
Agitator capacity700 L
Pump output / pressure80 L/min at 5 MPa
Diesel engine power / speed27 kW at 1800 rpm
Mixer recirculation discharge1100 L/min
Suitable water/cement ratio≥0.5:1
Agitator speed36 rpm
Pump typeVertical compact hydraulic twin-plunger pump
Pump diameter85 mm
Pump stroke220 mm
Pump cycles38 cycles/min
Maximum particle size5 mm
Dimensions (L × W × H)2400 × 2150 × 1700 mm
Weight1820 kg

This 80DPL-D model is separate from the existing 80/100DPI-D diesel unit. The listed pump duty is 80 L/min at 5 MPa; no 100 bar duty is inferred. Select the grout recipe and final operating conditions for the project.

Mixing, control and grout delivery.

01

Colloidal grout preparation

A high-speed vortex mixer prepares cement or bentonite slurry before agitation and pumping.

02

Compact vertical pump

A vertical twin-plunger arrangement integrates grout delivery into the base frame.

03

Pressure-holding system

The pump and pressure-holding arrangement support controlled injection with reduced pressure surges.

04

Diesel hydraulic drive

A 27 kW diesel engine powers the hydraulic system; flow and output can be controlled.

05

Hydraulic protection

Pressure relief on blockage and high-temperature warning and protection support system operation.

06

Air and water cooling

Both air and water coolers support hydraulic temperature management.

Match the plant to the project.

  • Highways and railways

    Cement or bentonite slurry injection for engineered infrastructure works.

  • Hydropower and construction

    Surface and underground grout mixing and pumping.

  • Mining

    Grout preparation and injection for assessed mine applications.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your grout recipe, required pumping duty, site layout and available power supply when requesting a project configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com