Diesel hydraulic power
A 55 kW air-cooled engine powers the hydraulic system for field operation.
DIESEL GROUT PLANTS
WGP800/1200/200PI-D
Diesel hydraulic grout station with an 800 L mixer, 1200 L agitator and 55 kW air-cooled engine. Adjustable pump output: 0–200 L/min; pressure: 0–5 MPa.
The WGP800/1200/200PI-D integrates a mixer, agitator and grout pump driven by a diesel-powered hydraulic system. Vortex mixing prepares cement or bentonite slurry, which is transferred to the agitator before pumping. A double-cylinder single-acting pump and an outlet buffer support continuous delivery with reduced pressure fluctuations. Stainless steel mixer and agitator tanks and accessible valve chambers support maintenance.





| Model | WGP800/1200/200PI-D |
|---|---|
| Mixer capacity | 800 L |
| Agitator capacity | 1200 L |
| Mixer output | 15 m³/h |
| Engine power / speed | 55 kW at 2500 rpm |
| Engine cooling | Air cooled |
| Suitable water/cement ratio | ≥0.5:1 |
| Mixer drive model | CMZ2040 |
| Mixer speed | 1500 rpm |
| Agitator drive model | 2W-400 |
| Agitator speed | 54 rpm |
| Pump output range | 0–200 L/min |
| Pump pressure range | 0–5 MPa |
| Pump type | Double-cylinder single-acting |
| Dimensions (L × W × H) | 3200 × 2200 × 2000 mm |
| Weight | 2460 kg |
The separately listed 200 L/min and 5 MPa maxima are range limits, not a guaranteed simultaneous operating point. Confirm the final engine specification, slurry recipe and required duty before selection.
A 55 kW air-cooled engine powers the hydraulic system for field operation.
Single-acting cylinders provide continuous output with reduced pulsation.
A buffer at the pump outlet reduces grouting pressure fluctuations.
The valve-chamber arrangement supports cleaning; special tools assist piston replacement.
The source specifies stainless steel mixer and agitator tanks.
Flow and pressure are steplessly adjustable for different injection requirements.
Grouting for dams, tunnels, subways, soil nails, curtains and anchors.
Building and bridge repair, foundation reinforcement and rock grouting.
Assessed foundation, mine-roadway, backfill and waterproof injection.
Compatible slurry preparation and pumping for pipe-jacking operations.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify your slurry recipe, required pumping duty, site layout, delivery distance and available power supply when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY