Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP500/700/100PI-E integrates a high-speed vortex mixer, agitator and hydraulic grout pump. Water, cement and compatible materials are mixed into homogeneous slurry, transferred to the agitator and pumped to the injection point. The integrated arrangement supports continuous preparation and grouting, with stepless adjustment of pump flow and pressure.

Specifications at a glance.

WGP500/700/100PI-E · Technical specifications
ModelWGP500/700/100PI-E
Mixer capacity500 L
Agitator capacity700 L
Mixer output7 m³/h
Mixer power7.5 kW
Mixer speed1450 rpm
Suitable water/cement ratio≥0.5:1
Agitator speed36 rpm
Agitator power1.5 kW
Pump output range0–100 L/min
Pump pressure range0–5 MPa
Pump motor power15 kW
Electrical supply380 V, 50 Hz
Dimensions (L × W × H)2700 × 1750 × 1650 mm
Weight1440 kg

The 100 L/min and 5 MPa values are separately listed range limits, not a guaranteed simultaneous operating point. This is the electric PI-E model; the diesel PI-D plant has separate specifications.

Mixing, control and grout delivery.

01

Stepless adjustment

Grouting output and pressure can be adjusted for different requirements.

02

Double-cylinder pump

Two grouting cylinders provide continuous output with reduced pulsation.

03

Vortex mixing

High-speed mixing prepares slurry before transfer to the agitator.

04

Transfer control

A squeeze handle selects transfer between mixer and agitator.

05

Protection functions

Motor overload protection and hydraulic oil over-temperature protection support operation.

Match the plant to the project.

  • Civil engineering

    Dams, tunnels, subways, soil nails, curtain and anchor grouting.

  • Structural repair

    Building and bridge repair, foundation reinforcement and slope support.

  • Marine foundations

    Assessed underwater, offshore-platform and coastal-foundation reinforcement.

  • Mining

    Roadway reinforcement, backfill and waterproof injection.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com