Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP200/300/100PI-E combines a high-shear colloidal grout mixer, agitator and hydraulic grout pump on one base frame. It mixes cement, ultra-fine cement and compatible admixtures for anchoring, soil nailing and other engineered injection work. Prepared grout passes to a slowly agitated holding tank while pumping proceeds, supporting continuous preparation and delivery. The source describes a bag breaker and hopper, hydraulic mixture transfer and cleaning access as part of its standard configuration.

Specifications at a glance.

WGP200/300/100PI-E · Technical specifications
ModelWGP200/300/100PI-E
Mixer volume200 L
Agitator volume300 L
Mixer production at W/C = 14 m³/h
Mixer circulation capacity1100 L/min
Suitable water/cement ratio0.5–1
Mixer electric motor7.5 kW at 1450 rpm
Agitator speed36 rpm
Agitator electric motor1.5 kW at 1450 rpm
Grout pump modelGGH90
Grout pump maximum output100 L/min
Grout pump working pressure10 MPa
Grout pump electric motor11 kW at 1450 rpm
Water tank60 L
Dimensions (L × W × H)2400 × 2300 × 1620 mm
Weight1320 kg

The 1100 L/min circulation figure is not grout-pump delivery. The maximum 100 L/min output and 10 MPa working pressure are separate source-listed specifications; confirm the required operating point. Application names do not establish a complete jet-grouting or multi-component system configuration.

Mixing, control and grout delivery.

01

Colloidal mixing

A high-shear circulation mixer prepares cement and additive-based grout.

02

Holding agitation

A hydraulically driven vertical agitator keeps mixed grout moving during pumping.

03

Motor configuration

The source specifies a Siemens motor with WEG as an option.

04

Electrical controls

Schneider components are specified for the electrical control box.

05

Hydraulic reversing

A Yuken reversing valve controls the pump hydraulic system.

06

Transfer and protection

Butterfly valves and a linked switch control transfer; oil-temperature monitoring controls the cooler fan and over-temperature shutdown.

Match the plant to the project.

  • Anchoring and soil nails

    Continuous grout preparation for anchoring and soil-nailing projects.

  • Ground treatment

    Compatible slurry preparation for soil mixing, permeation grouting and bentonite work.

  • Tunnelling

    Grout preparation for assessed TBM annulus-backfill systems.

  • Backfill systems

    Mixing and pumping for suitably designed paste-backfill or cemented-rockfill projects.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com