Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP300/350/85PL-E combines a mixer, agitator and hydraulic plunger grout pump on one base frame. It prepares and pumps compatible mixtures containing water, cement, sand, bentonite, filler, clay powder, silicates or other additives. Separate low- and high-pressure duties and stepless speed control support different grouting requirements.

Specifications at a glance.

WGP300/350/85PL-E · Technical specifications
ModelWGP300/350/85PL-E
Mixer capacity300 L
Agitator capacity350 L
Low-pressure pump duty85 L/min at 24 bar
High-pressure pump duty55 L/min at 50 bar
Pump typeHydraulic plunger pump
Mixer power9 kW
Mixer speed1500 rpm
Agitator power1.5 kW
Agitator speed36 rpm
Electrical supplyThree-phase 380 V, 50 Hz
Dimensions (L × W × H)2100 × 2030 × 1700 mm
Weight1250 kg

The low-pressure and high-pressure ratings are separate operating duties. The 85 L/min maximum is not the output at 50 bar. Material compatibility and allowable particle size require confirmation for the selected pump and recipe.

Mixing, control and grout delivery.

01

Single-frame layout

The mixer, agitator and pump share a compact base frame.

02

Two pressure duties

Low- and high-pressure pumping modes support different output requirements.

03

Hydraulic valves

The source specifies Yuken relief and directional valves for the hydraulic system.

04

Butterfly-valve transfer

Butterfly valves connect the mixer and agitator.

05

Temperature protection

An oil-temperature gauge controls the cooler fan, with automatic shutdown if oil temperature is too high.

Match the plant to the project.

  • Ground stabilisation

    Soil grouting and earth-foundation stabilisation.

  • Waterproofing and tunnels

    Waterproof grouting and tunnel-lining works.

  • Foundations and structures

    Underwater foundations and bridge-deck work.

  • Geotechnical injection

    Deep-well casing and slope-line grouting.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com