Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP250/700/75PI-E combines a high-speed colloidal mixer, agitator and vertical hydraulic grout pump on one frame. Water, cement or bentonite is mixed into a homogeneous slurry, transferred to the agitator and then injected by the pump. The electric motor drives the hydraulic system, with adjustable pressure and output. Separate mixing and holding vessels support continued grout preparation during pumping.

Specifications at a glance.

WGP250/700/75PI-E · Technical specifications
ModelWGP250/700/75PI-E
Mixer capacity250 L
Agitator capacity700 L
Maximum pump pressure100 bar
Low-pressure pump range0–75 L/min; 0–50 bar
High-pressure pump range0–40 L/min; 0–100 bar
Mixer recirculation flow1100 L/min
Suitable water/cement ratio≥0.5:1
Mixer motor power7.5 kW
Mixer speed1450 rpm
Agitator motor power1.5 kW
Agitator speed35 rpm
Pump typeVertical hydraulic, single-piston double-acting
Pump power7.5 kW
Maximum particle size5 mm
Dimensions (L × W × H)2710 × 1100 × 1820 mm
Weight1060 kg

Low- and high-pressure pump ranges are separate operating conditions. The 1100 L/min mixer value describes recirculation, not grout delivery or batch production capacity.

Mixing, control and grout delivery.

01

Colloidal mixing

High-speed vortex mixing prepares cement or bentonite slurry.

02

Vertical hydraulic pump

A compact, single-piston double-acting pump uses a two-oil-gear arrangement for different pressure and output requirements.

03

Adjustable pump ranges

Low- and high-pressure ranges support different injection duties.

04

Pressure relief

The hydraulic drive provides pressure relief when the pumping line is blocked.

05

Site handling

A compact frame and lower mixer charging height support operation.

Match the plant to the project.

  • Transport infrastructure

    Cement or bentonite slurry grouting for highways and railways.

  • Hydropower and construction

    Mixing and injection for surface and underground projects.

  • Mining

    Grout preparation and pumping for assessed mine applications.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com