Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated grout preparation and delivery.

The WGP1200/3000/300H-E combines weighing, high-turbulence mixing, agitation and hose-pump delivery. A batching system and PLC support automatic and manual operation, with quantitative mixing of at least three materials. The large agitator provides holding capacity for cement or bentonite slurry before backfill injection.

Specifications at a glance.

WGP1200/3000/300H-E · Technical specifications
ModelWGP1200/3000/300H-E
Mixer volume1200 L
Agitator volume3000 L
Hose pump output300 L/min
Weighing sensorS-type tension/compression sensor
Weighing load (technical table)800 kg
Weighing output signalCurrent signal
Vibration motor24 V; 4 kN; 0.37 kW
Mixer slurry pump power11 kW
Mixer-section output (source-listed)80 m³/h
Agitator geared motor power3 kW
Agitator speed45 rpm
Hose pump pressure1.6 MPa
Hose pump power18.5 kW
Air compressor power2.2 kW
Power supply options220 V, 380 V or 415 V
Dimensions (L × W × H)4150 × 2100 × 2750 mm
Weight4000 kg

The technical table and headline specify an 800 kg weighing load; a 500 kg narrative value conflicts and is not used. The source lists 80 m³/h in the mixer section; it is not the hose-pump delivery rate. Confirm the complete batch cycle and electrical configuration before ordering.

Mixing, control and grout delivery.

01

Automatic batching

A weighing system supports quantitative preparation of multiple materials.

02

PLC control

Automatic and manual modes support different site workflows.

03

High-turbulence mixing

The mixer prepares slurry before transfer into the holding agitator.

04

Large holding volume

A 3000 L agitator keeps prepared slurry moving before pumping.

05

Industrial hose pump

A heavy-duty hose pump provides the listed backfilling duty.

Match the plant to the project.

  • Backfill injection

    Preparation and pumping of suitable cement or bentonite grout for void and hole filling.

  • TBM and underground works

    Grout production for assessed tunnel and underground backfilling.

  • Pipe jacking and drilling

    Bentonite suspensions for microtunnelling, pipe jacking and directional drilling.

  • Infrastructure and mining

    Engineered grouting in transport, hydropower, construction and mine projects.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, site layout, delivery distance and available power supply when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com