Automatic batching
Three weighing modules, PLC control and a touch-screen interface support adjustable recipes and automatic or manual operation.
AUTOMATIC GROUT PLANTS
WGP400/1000/95/165DPL-E/A
Automatic electric grout mixing and pumping equipment with a 400 L mixer, 1000 L agitator and twin-plunger pump. Adjustable pump ranges: 0–95 L/min and 0–16.5 MPa.
The WGP400/1000/95/165DPL-E/A integrates a screw feeder, high-shear colloidal mixer, agitator and horizontal hydraulic grout pump. Three weighing modules, an ultrasonic liquid-level meter and PLC touch-screen control support manual or automatic operation with multiple recipes. Twin high-pressure plungers help maintain a continuous grout flow for soil consolidation, piling and material transfer.





| Model | WGP400/1000/95/165DPL-E/A |
|---|---|
| Mixer effective volume | 400 L |
| Agitator effective volume | 1000 L |
| Adjustable pressure range | 0–16.5 MPa |
| Maximum mixing capacity | 10 m³/h |
| Circulation pump motor | 11 kW |
| Circulation pump speed | 1450 rpm |
| Circulation capacity | 1000 L/min |
| Agitator motor | 3.0 kW |
| Water supply motor | 4.0 kW |
| Water supply flow / head | 20 m³/h / 30 m |
| Air supply motor | 2.2 kW |
| Air supply displacement (source-listed) | 0.25 m³/h |
| Control system | PLC; DC 24 V control power |
| Plunger diameter | 85 mm |
| Plunger stroke | 300 mm |
| Adjustable flow range | 0–95 L/min |
| Discharge connection | G1¼ |
| Inlet connection | G2 |
| Oil tank | 200 L |
| Pump power unit | 37 kW |
| Maximum grain size | 2 mm |
| Working pressure | 16.5 MPa |
| Dimensions excluding screw feeder (L × W × H) | 3820 × 2280 × 2300 mm |
| Weight excluding screw feeder | 3750 kg |
| Screw feeder output | 30 t/h |
| Screw feeder motor | 5.5 kW |
| Screw feeder dimensions (L × W × H) | 3700 × 600 × 800 mm |
| Screw feeder weight | 280 kg |
Source parameters were obtained by water testing; actual grout performance depends on the recipe and system resistance. Maximum pressure and maximum flow are separate range limits, not a guaranteed simultaneous duty. The source lists air displacement as 0.25 m³/h; confirm this unit before sizing the air supply. Dimensions and mass exclude the screw feeder, listed separately.
Three weighing modules, PLC control and a touch-screen interface support adjustable recipes and automatic or manual operation.
A high-speed colloidal mixer and pneumatic pinch valve support mixing and smooth slurry transfer.
An ultrasonic liquid-level meter measures agitator contents.
Two plungers deliver continuous grout flow with reduced pulsation, with stepless adjustment of flow and pressure.
A stroke counter, motor overload protection, hydraulic over-temperature protection and hydraulic overpressure protection support operation.
The source describes a steerable trailer with adjustable support height. Confirm the final site arrangement when ordering.
Cement or bentonite slurry injection for soil consolidation and piling.
Grouting for mines, tunnels, culverts and subways.
Grout preparation and injection for engineered water-related structures.
Grout transport where the pipe route and pumping duty have been assessed.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify your grout recipe, required pumping duty, site layout and available power supply when requesting a project configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY