Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated grout preparation and delivery.

The WGP500/2000/165H-E integrates automatic batch weighing, PLC control, mixing, agitation and grout pumping. The system prepares cement or bentonite slurry for surface, underground and TBM work. Separate material outlets support direct hose-pump delivery or secondary processing through the source-listed water-pump route. Automatic and manual modes support operation according to the project sequence.

Specifications at a glance.

WGP500/2000/165H-E · Technical specifications
ModelWGP500/2000/165H-E
Mixer volume500 L
Agitator volume2000 L
Hose pump output165 L/min
Weighing sensorS-type tension/compression sensor
Weighing load200 kg
Weighing output signalCurrent signal
Vibration motor24 V; 4 kN; 0.37 kW
Mixer slurry pump power11 kW
Mixer-section output (source-listed)80 m³/h
Agitator geared motor power3 kW
Agitator speed45 rpm
Water pump output15 m³/h
Water pump power5.5 kW
Hose pump pressure1.0 MPa
Hose pump power7.5 kW
Air compressor power2.2 kW
Power supply options220 V, 380 V or 415 V
Dimensions (L × W × H)4100 × 2100 × 2500 mm
Weight3200 kg

The source lists 80 m³/h in the mixer section; it is not the 165 L/min hose-pump delivery rate. Generic company-wide claims about 500 bar pumps are not ratings for this 1.0 MPa model. Confirm supply voltage and the intended outlet arrangement.

Mixing, control and grout delivery.

01

Batch weighing

A 200 kg weighing system supports automatic batching.

02

PLC operation

Automatic and manual control modes support mixing and delivery.

03

High-turbulence mixing

A 500 L mixer prepares slurry for the 2000 L agitator.

04

Hose-pump delivery

An industrial hose pump delivers the listed 165 L/min duty at 1.0 MPa.

05

Material routing

The source describes direct hose-pump and secondary-processing outlet routes.

Match the plant to the project.

  • Ground and underground backfill

    Cement or bentonite slurry preparation for engineered injection.

  • TBM construction

    Grout production and pumping for tunnel-related backfill requirements.

  • Pipe jacking and microtunnelling

    Preparation and pumping of compatible bentonite suspensions.

  • Infrastructure

    Grouting for highway, railway, hydropower, construction and mining works.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, site layout, delivery distance and available power supply when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com