Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP500/700/100PI-D combines a mixer, agitator and hydraulic two-cylinder piston grout pump with a diesel-powered hydraulic pack on one base frame. Prepared slurry passes from the mixer to the agitator, whose outlet feeds the pump for continuous grouting. Stepless output adjustment and a compact layout support ground and underground engineering work. The source specifies a Changchai EH36 diesel engine.

Specifications at a glance.

WGP500/700/100PI-D · Technical specifications
ModelWGP500/700/100PI-D
Mixer capacity500 L
Agitator capacity700 L
Diesel engine rating25 kW / 36 hp
Engine model (source-listed)Changchai EH36
Engine speed2200 rpm
Water/cement ratio (source-listed)0.5–1
Mixer speed1500 rpm
Agitator speed36 rpm
Pump typeHydraulic two-cylinder piston pump
Pump pressure range0–50 bar
Pump output range0–100 L/min
Dimensions (L × W × H)2900 × 1960 × 1550 mm
Weight1790 kg

Engine power is reproduced as the source lists it: 25 kW / 36 hp. Confirm the final engine data sheet. Pump output and pressure are separate adjustable ranges. This diesel PI-D version is distinct from the electric PI-E station.

Mixing, control and grout delivery.

01

Diesel hydraulic drive

The engine supplies the hydraulic power pack for mixing and grout pumping.

02

Integrated base frame

Mixer, agitator and piston pump are combined into one unit.

03

Hydraulic control

The source specifies Yuken relief and directional valves.

04

Butterfly valves

Mixer and agitator valves control slurry transfer.

05

Oil-temperature protection

A temperature gauge controls the cooler fan, with automatic shutdown if temperature becomes too high.

Match the plant to the project.

  • Ground engineering

    Soil injection and earth-foundation stabilisation.

  • Waterproofing and tunnels

    Waterproof grouting and tunnel lining.

  • Foundations and bridge works

    Underwater foundations and bridge decks.

  • Geotechnical grouting

    Deep-well casing and slope-line injection.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com