High-speed mixing
Vortex mixing prepares homogeneous cement or bentonite slurry.
ELECTRIC GROUT PLANTS
WGP350/800/70PI-E
Electric hydraulic grout station with a 350 L mixer and 800 L agitator. Pump output range: 0–70 L/min, with 70 L/min specified at 3 MPa; pressure range: 0–7 MPa.
The WGP350/800/70PI-E combines a high-speed vortex mixer, agitator and hydraulic twin-cylinder grout pump on one base frame. Water, cement or bentonite is mixed into slurry and transferred to the agitator for continuous preparation and pumping. An electric motor powers the hydraulic system, while stepless flow and pressure adjustment supports different injection duties.




| Model | WGP350/800/70PI-E |
|---|---|
| Mixer capacity | 350 L |
| Agitator capacity | 800 L |
| Mixer output | 5 m³/h |
| Suitable water/cement ratio | ≥0.5:1 |
| Mixer motor power | 15 kW |
| Mixer speed | 1450 rpm |
| Agitator motor power | 1.5 kW |
| Agitator speed | 35 rpm |
| Pump output range | 0–70 L/min |
| Specified pump duty | 70 L/min at 3 MPa |
| Pump pressure range | 0–7 MPa |
| Pump motor power | 15 kW |
| Pump type | Hydraulic twin-cylinder, single-acting |
| Dimensions (L × W × H) | 2590 × 2100 × 1980 mm |
| Weight | 1950 kg |
The technical table specifies 70 L/min at 3 MPa. The 7 MPa figure is the pressure-range limit, not a stated simultaneous duty at 70 L/min. Confirm the required duty and electrical configuration.
Vortex mixing prepares homogeneous cement or bentonite slurry.
Pump output and pressure are steplessly adjustable.
The single-acting pump supports continuous output with reduced pulsation.
A buffer at the pump outlet reduces pressure fluctuations.
The valve-chamber design supports cleaning; supplied special tools assist piston replacement.
A squeeze handle controls transfer between mixer and agitator.
Dams, tunnels, subways, soil nails, curtains and anchor grouting.
Repair, foundation reinforcement, slope support and rock grouting.
Assessed underwater, offshore-platform and coastal-foundation injection.
Roadway reinforcement, backfill, waterproofing and pipe-jacking slurry work.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify your slurry recipe, required pumping duty, available power supply and site layout when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY