Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP220/450/38H-H integrates slurry mixing, agitation and hose-pump delivery in one modular unit. A centrifugal pump recirculates water, cement and suitable additives through the mixer. A squeeze valve then redirects the prepared slurry into the agitator, leaving the mixer free for the next batch. The hose pump delivers slurry from the agitated holding vessel. Drive power comes from an external hydraulic source, so the drive system does not require a site electrical connection.

Specifications at a glance.

WGP220/450/38H-H · Technical specifications
ModelWGP220/450/38H-H
Mixer volume220 L
Agitator volume450 L
Hose pump output19–38 L/min
Mixer speed1500 rpm
Agitator speed46 rpm
Hose pump modelGH32-330SR
Hose pump pressure14 bar
Required external hydraulic supply45 L/min at 16.5 MPa
Drive systemExternal hydraulic supply
Dimensions (L × W × H)2350 × 1030 × 1920 mm
Weight950 kg

The required hydraulic supply is 45 L/min at 16.5 MPa; this is the drive supply requirement, not the grout delivery pressure. Hose-pump pressure is 14 bar. Confirm slurry compatibility and the external hydraulic source before selection.

Mixing, control and grout delivery.

01

External hydraulic drive

Uses a suitable hydraulic power source, without an electrical connection for its drive system.

02

Recirculation mixer

Centrifugal-pump circulation blends water, cement and compatible additives.

03

Agitated holding tank

The 450 L agitator keeps prepared slurry moving while it awaits pumping.

04

Hose-pump delivery

A GH32-330SR pump provides the specified output and pressure.

05

Manual controls

Hydraulic valves, pressure gauges and a speed-control valve support operation and monitoring.

06

Mixing and transfer selection

A squeeze valve selects recirculation in the mixer or transfer into the agitator.

Match the plant to the project.

  • Civil engineering

    Preparation and delivery of compatible cement slurry for filling and grouting.

  • Tunnel works

    Selected tunnel void filling and backfill operations.

  • Cavity filling

    Placement of pumpable cement-based slurry into accessible gaps and cavities.

  • Hydraulically powered sites

    Onshore or offshore filling operations where a compatible hydraulic source and site arrangement are available.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com