Engineering & construction machineryinfo@wodetec.com/+86-19939106571
Wode Heavy Industry

Integrated mixing, agitation and grout delivery.

The WGP300/300/300/70/80PI-E integrates a mixer, two agitators and a mechanically driven plunger mortar pump. Mixed cement slurry enters the first agitator, where sand can be added and blended. The mortar mixture then flows into the second agitator, from which the pump draws material for grouting, placement or backfilling. Mixing of the next batch can proceed during pumping. Frequency control provides stepless adjustment of pump flow, with an HMI displaying flow and pressure.

Specifications at a glance.

WGP300/300/300/70/80PI-E · Technical specifications
ModelWGP300/300/300/70/80PI-E
Mixer capacity300 L
Agitator capacity2 × 300 L
Maximum pump output70 L/min
Maximum pump pressure8 MPa
Mixer water/cement ratio0.5–1
Mixer speed1450 rpm
Mixer power7.5 kW
No. 1 agitator capacity300 L
No. 1 agitator speed49 rpm
No. 1 agitator power2.2 kW
No. 2 agitator capacity300 L
No. 2 agitator speed36 rpm
No. 2 agitator power1.5 kW
Pump typeMechanical plunger mortar pump
Pump power11 kW
Power supplyThree-phase 380 V, 50 Hz
Dimensions (L × W × H)2800 × 1900 × 1650 mm
Weight1350 kg

Maximum flow and maximum pressure are separate limits and are not stated as a simultaneous duty. Confirm mortar composition, aggregate compatibility and required cabinet protection for the final configuration.

Mixing, control and grout delivery.

01

Three-vessel workflow

One mixer and two agitators support slurry preparation, sand addition and holding before pumping.

02

Adjustable delivery

Frequency control provides stepless pump flow adjustment; pressure and output can be adjusted.

03

HMI monitoring

The operator interface displays flow and pressure.

04

High-speed mixing

A vortex mixer prepares the cement slurry before its transfer to the agitators.

05

Transfer control

A squeeze handle controls transfer between mixing and agitation stages.

06

Compact layout

The mixer, agitators and mortar pump are integrated into one plant.

Match the plant to the project.

  • Tunnels and voids

    Tunnel backfill and filling of underground cavities.

  • Ground reinforcement

    Micropile mortar injection, soil nails, anchors, rock bolts and foundation reinforcement.

  • Repair and maintenance

    Masonry filling, concrete repair and bridge or infrastructure maintenance.

  • Mortar preparation and transfer

    Compatible cement, refractory or fireproof mortar preparation and pumping, subject to material assessment.

Application areas; suitability and the grouting design require project-specific engineering assessment.

Define your working conditions.

Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.

Discuss your requirements ↗

LET’S DISCUSS YOUR REQUIREMENTS

Tell us about your project.

Material. Flow. Pressure. Power supply. Destination.

Request a quote

info@wodetec.com