Twin-plunger pump
A compact vertical pump delivers grout with a pressure-holding arrangement.
ELECTRIC GROUT PLANTS
WGP400/700/80DPL-E
Electric hydraulic TBM grout plant with a 400 L mixer, 700 L agitator and vertical twin-plunger pump. Pump ranges: 0–80 L/min at 0–25 bar or 0–58 L/min at 0–40 bar.
The WGP400/700/80DPL-E combines a high-speed colloidal mixer, agitator and vertical hydraulic grout pump on one base frame. Water, cement or bentonite is mixed into a homogeneous slurry, transferred to the agitator and pumped to the injection point. An electric motor drives the hydraulic system. The twin-plunger pump and pressure-holding arrangement support controlled injection, while adjustable pressure and output accommodate different operating requirements.





| Model | WGP400/700/80DPL-E |
|---|---|
| Mixer capacity | 400 L |
| Agitator capacity | 700 L |
| Maximum pump pressure | 40 bar |
| Low-pressure pump range | 0–80 L/min; 0–25 bar |
| High-pressure pump range | 0–58 L/min; 0–40 bar |
| Mixer recirculation flow | 1100 L/min |
| Suitable water/cement ratio | ≥0.5:1 |
| Mixer motor power | 7.5 kW |
| Mixer speed | 1450 rpm |
| Agitator motor power | 1.5 kW |
| Agitator speed | 36 rpm |
| Pump type | Vertical hydraulic twin-plunger pump |
| Pump power | 11 kW |
| Maximum particle size | 5 mm |
| Dimensions (L × W × H) | 2350 × 2100 × 1830 mm |
| Weight | 1530 kg |
The source technical table specifies a maximum pump pressure of 40 bar. A generic 50 bar pressure-pulsation example in the source narrative is not used as a rating for this model. Low- and high-pressure ranges are separate operating conditions; 1100 L/min is mixer recirculation flow.
A compact vertical pump delivers grout with a pressure-holding arrangement.
Different flow and pressure ranges support assessed pumping requirements.
The colloidal mixer prepares cement or bentonite slurry before agitation and injection.
The mixer tank includes liquid-level indication.
Pressure relief on blockage and high-temperature warning and protection support operation.
Air and water coolers support hydraulic temperature management.
Grout preparation and delivery for tunnel-related injection and lining work.
Assessed backfilling and foundation grouting.
Mixing and pumping for hydropower and underground construction.
Compatible cement or bentonite slurry preparation for specified site applications.
Application areas; suitability and the grouting design require project-specific engineering assessment.
Specify the slurry recipe, required pumping duty, delivery distance, site conditions and available power when requesting a configuration.
Discuss your requirements ↗LET’S DISCUSS YOUR REQUIREMENTS
Material. Flow. Pressure. Power supply. Destination.
EQUIPMENT INQUIRY